You are here

Star Trek Tos, Aluminum Machined, Scotty's Magnetic Polarity Tool Reproduction

Star Trek TOS, Aluminum Machined, Scotty's Magnetic Polarity Tool Reproduction


Star Trek TOS, Aluminum Machined, Scotty's Magnetic Polarity Tool Reproduction


Star Trek TOS, Aluminum Machined, Scotty's Magnetic Polarity Tool Reproduction

Star Trek TOS, Aluminum Machined, Scotty's Magnetic Polarity Tool Reproduction

Star Trek TOS, Aluminum Machined, Scotty's Magnetic Polarity Tool Reproduction
Star Trek TOS, Aluminum Machined, Scotty's Magnetic Polarity Tool Reproduction

Star Trek TOS, Aluminum Machined, Scotty's Magnetic Polarity Tool Reproduction
Star Trek TOS, Aluminum Machined, Scotty's Magnetic Polarity Tool Reproduction



Star Trek TOS, Aluminum Machined, Scotty's Magnetic Polarity Tool Reproduction

Star Trek TOS, Aluminum Machined, Scotty's Magnetic Polarity Tool Reproduction


Star Trek TOS, Aluminum Machined, Scotty's Magnetic Polarity Tool Reproduction
   Star Trek TOS, Aluminum Machined, Scotty's Magnetic Polarity Tool Reproduction


Star Trek TOS, Scotty's Magnetic Polarity Tool. That Which Survives, S3 E17 1969. Body AS EXACTLY as I could to the Set Used. Do not miss out on this one. A+++ quality Prop, accurately machining and mirror polishing the handle is labor intense! YOUTUBE SCOTTYS MAGNETIC POLARITY TOOL. Scott will enter the crawlway leading to the matter antimatter reaction chamber and attempt to manually shut off the flow of fuel with a Magnetic Probe. Scott installs explosives at the end of the service crawlway that will permit Spock to jettison the pod if Scott ruptures the magnetic bottle. The episode's co-star (The Hot Alien Losira) was played by Lee Meriwether (Miss America 1955) who was also most famous for playing CatWoman in the 1966 BatMan movie. Constructed of machined & hand-mirror-polished solid aluminum stock and acrylic.

Prop Measures (nominal Inches): 12 1/2 inches x 3 inches wide at the head. Weight is an impressive at 10 1/10 ounces.

The handle end removes (as on the TV show) and has the machined swirls on the bottom. The handle end was painted as this is a reproduction, while the Set Used prop had red construction paper glued-on and we thought that not durable for a collector. The fork features unevenly spaced cuts on the plain side (just like on the TV show).

The fork also features the correct 1/16 inch thick jumper-plate above the red-moon with unevenly spaced holes (to the right end) just like the TV prop. The fork is one part and secured with a machine screw. The Jumper plate (on the fork end) is secured in a mortised pocket so it stays-on. The handle shaft is machined as one part from a single round aluminum billet. Some Star Trek Prop History For Inquiring Minds.

Most of these Prop Makers and Technicians have passed-on. Below are old-timer accounts of convention conversations before conventions were really a fad.


(all these are therefore 2nd hand stories). The persons quoted worked for; Desilu ®, NBC ®, Paramount ® & Gene.

And made all the metal prop parts for all three seasons of the show. Parts were made to order for each episode as in those times (the 1960's) as machining was done by hand and there was no advantage to making short runs (and no studio funding either). Each episode had a specific budget.

Speaking of budgets, Bob relied on his Star Trek friend. According to Bob there was no magic drum of Phaser Nozzles and every job was a mad-dash to meet the filming deadlines.

Because parts were made only to order, parts varied quite a bit. These variations can be seen in all the surviving examples of TOS hand props from Phaser to Communicators and Tricorders. Sometimes it was not that a new design was needed but rather that when one Wings it from a sketch, in a hurry using what is on-hand, you get an unintended-new-version of something (in the 1960's the TV audience never could see that). Robert Archer and Bob Stone worked closely together so when the show was cancelled suddenly in season three, Robert Archer ended up with a nice collection of hand props. Made the molds for hand props. He also did all the casting and forming. This included; Vacuum form bucks, Fiberglass molds and urethane molds. Again, according to him most work is done in the normal Hollywood maddening rush.

He shared with his convention friends that there were many molds made from molds when the production schedule demanded this. He also shared that when the show ended he rescued the molds from being discarded by putting them in his garage.

1919 was the director of special effects for the show. He handled and repaired many of the props on-set. When the show was cancelled in season three he rescued many hand props and even some models from the scrap heap. Dick Ruben, Prop & Art Assistant on the show, got his Set-Used Klingon disruptor from James. Ruggs held on to his rather large Star Trek collection for many years.
It is widely known that Greg Jein got his Holy-Grail Hero Phaser from James. In closing a nod to. A prop technician, who reported that he repaired some hand props hundreds of times as they were often damaged during filming. He had also shared that the fiberglass Mid-Grade's, and some other props often used basswood strips between the seams to establish uniform dimensions.

Watch some YouTube Star Trek TOS bloopers to see what he was talking when it comes to repairs and hand props flying apart. This item is in the category "Collectibles\Science Fiction & Horror\Star Trek Collectibles\Other Star Trek Collectibles". The seller is "jonpaultrek2012" and is located in this country: US. This item can be shipped worldwide.

  • Character: Scotty
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Type: Star Trek Prop
  • Vintage: No
  • Signed: No
  • Convention/Event: New York Comic Con
  • Genre: Science Fiction & Horror
  • Brand: jonpaultrek2012 ™ ®
  • Series/Movie: Original Series
  • Franchise: Star Trek


Star Trek TOS, Aluminum Machined, Scotty's Magnetic Polarity Tool Reproduction
   Star Trek TOS, Aluminum Machined, Scotty's Magnetic Polarity Tool Reproduction