THIS IS FOR THE ELECTRONICS ONLY. Up for grabs is a set of GMProps "Boomerang" Phaser Electronics Upgrade kit that is designed to fit in a Stapleton Productions model kit. I have a few of these available. The Boomerang phaser electronics has full lights and sounds. There are 3 firing modes: Stun, Heavy Stun, and Kill. Each mode has a different sound; The Stun settings are pulsed phaser sounds and last about 1.5 seconds; whereas the Kill setting has a continuous firing sound as long as the fire button is held down. This was usually used on the shows to heat something rapidly or even melt it. The 16-LED power level display is controlled with the UP and DOWN buttons. The 3 modes are indicated on the display by different colors; Stun is Green (LED1-8), Heavy Stun is Yellow (LED9-12), and Kill is Red (LED13-16). The firing emitter at the tip gets brighter as you increase the power levels. The UP and DOWN buttons have distinctively different beep sounds. Diagnostic Mode: Pushing the UP button past LED16 will cause the display to sequence back and forth. This simulates the diagnostic mode. Overload: While in diagnostic mode if you hold down the DOWN button until you hear 3 quick beeps you will be in Overload mode. Pressing the UP button once arms the phaser and it creates a simulated explosion after 10 seconds. You will notice the display sequences faster and faster as it approaches critical until all of the lights are on and you hear the explosion.
The phaser will shutdown after this. Other features: the electronics is powered by a 3.7V LiPo rechargeable battery (included). There is a USB charging cable included as well. Power Saving Mode: if the phaser is on and inactive for more than 2 minutes the power will automatically shut off.